Search results for "anion exchange"
showing 10 items of 16 documents
Single-Crystal-to-Single-Crystal Anion Exchange in a Gadolinium MOF: Incorporation of POMs and [AuCl4]−
2016
The encapsulation of functional molecules inside porous coordination polymers (also known as metal-organic frameworks, MOFs) has become of great interest in recent years at the field of multifunctional materials. In this article, we present a study of the effects of size and charge in the anion exchange process of a Gd based MOF, involving molecular species like polyoxometalates (POMs), and [AuCl4]−. This post-synthetic modification has been characterized by IR, EDAX, and single crystal diffraction, which have provided unequivocal evidence of the location of the anion molecules in the framework.
Desulfurization: Critical step towards enhanced selenium removal from industrial effluents
2017
Abstract Selenium (Se) removal from synthetic solutions and from real Flue Gas Desulfurization (FGD) wastewater generated by a coal-fired power plant was studied for the first time using a commercial iron oxide impregnated strong base anion exchange resin, Purolite ® FerrIX A33E. In synthetic solutions, the resin showed high affinity for selenate and selenite, while sulfate exhibited a strong competition for both oxyanions. The FGD wastewater investigated is a complex system that contains Se (∼1200 μg L −1 ), SO 4 2− (∼1.1 g L −1 ), Cl − (∼9.5 g L −1 ), and Ca 2+ (∼5 g L −1 ), alongside a broad spectrum of toxic trace metals including Cd, Cr, Hg, Ni, and Zn. The resin performed poorly again…
Pd-Cu catalysts supported on anion exchange resin for the simultaneous catalytic reduction of nitrate ions and reductive dehalogenation of organochlo…
2019
International audience; The present work proposes the simultaneous removal of these classes of pollutants by a catalytic hydrotreatment processes. For this purpose, bimetallic Pd-Cu catalysts (with mass ratio Pd:Cu of 4:1) supported on macroporous strong base anion resin were prepared by different methods. The catalysts were characterized (by XRD, SEMEDX, XPS, AAS and H-2 chemisorption) and tested in a continuous flow system. The selected catalyst preparation protocol consists in a two-step method, which implies the deposition of palladium by ion exchange and the subsequent deposition of copper by controlled reaction on the surface of the pre-reduced palladium. The effectiveness of the cata…
N-Propyl-N′-2-pyridylurea-modified silica as mixed-mode stationary phase with moderate weak anion exchange capacity and pH-dependent surface charge r…
2018
Herein, we present a novel silica-based stationary phase modified with N-propyl-N'-2-pyridylurea selector. Due to the weakly basic properties of the pyridine selector and the presence of residual silanols after selector immobilization, a zwitterionic surface with a pI observed at approximately pH 5.5 was measured by electrophoretic light scattering in pH-dependent ζ-potential determinations. The capability of the new N-propyl-N'-2-pyridylurea-modified silica to serve as mixed-mode stationary phase was investigated. For this purpose, it was characterized under RP and HILIC conditions using test mixtures. Subsequent classification of this stationary phase in comparison to in-house and commerc…
Maturation of a Key Resource – The Germanium-68/Gallium-68 Generator: Development and New Insights
2011
(68)Ge/(68)Ga radionuclide generators have been investigated for almost fifty years, since the cyclotron-independent availability of positron emitting (68)Ga via the (68)Ge/(68)Ga system had always attracted researches working in basic nuclear chemistry as well as radiopharmaceutical chemistry. However, it took decades and generations of research (and researchers) to finally reach a level of (68)Ge/(68)Ga radionuclide generator designs adequate to the modern requirements of radiometal labelling chemistry. Nevertheless, most of the existing commercial generator systems address aspects of (68)Ge breakthrough and safe synthesis of (68)Ga radiopharmaceuticals by adopting eluate post-processing …
Adsorption of methotrexate and calcium leucovorin onto cholestyramine in vitro.
2003
Abstract Methotrexate (MTX), an antimetabolite of folic acid, is a drug widely used in the treatment of different types of cancer. When high doses are administered, it is necessary to interrupt its action by administering calcium leucovorin (CaL). The main pathway of MTX and CaL elimination in humans occurs through the kidney, but about 10% is excreted in the faeces via the bile. Drugs, foods and sorbents in intestinal lumen modify MTX and CaL reabsorption. Individual and simultaneous studies on the adsorption of MTX and CaL from aqueous phosphate buffer by cholestyramine were carried out in order to calculate the adsorption process of MTX and CaL to cholestyramine, and to characterize the …
Evaluation of advanced silica packings for the separation of biopolymers by high-performance liquid chromatography
1989
Abstract The linear solvent strength model of Snyder was applied to describe fast protein separations on 2.1-μm non-porous, silica-based strong anion exchangers. It was demonstrated on short columns packed with these anion exchangers that (i) a substantially higher resolution of proteins and nucleotides was obtained at gradient times of less than 5 min than on porous anion exchangers; (ii) the low external surface area of the non-porous anion exchanger is not a critical parameter in analytical separations and (iii) μg-amounts of enzymes of high purity and full biological activity were isolated.
Activation of Stainless Steel 316L Anode for Anion Exchange Membrane Water Electrolysis
2023
The increased emphasis on renewable energy has resulted in a surge of R&D efforts into hydrogen and battery research. The intensive electrochemical environment surrounding the anodic oxygen evolution reaction (OER) has plagued both the activity and stability of the catalytic layer, substrate and porous transport layer, ultimately affecting both these industries. Herein, we report the benefits of potential cycling (PC) a 316L stainless steel felt porous transport layer (PTL) for use in anion exchange membrane water electrolysis. The PC increased surface roughness and created a CrFe5Ni2-OxHy layer through the oxidation of iron as shown by SEM, EDS, XPS, XRD and Raman spectroscopy. Post-PC tes…
Determination of total ribonucleotide pool in plant materials by high-pH anion-exchange high-performance liquid chromatography following extraction w…
2005
A new, improved method that only requires a potassium hydroxide extraction procedure is presented for the analysis of a full nucleotide pool in plant materials. Quantification was performed by high-pH anion-exchange chromatography (HPAEC) with UV detection after a potassium hydroxide extraction, and allowed the quantification of 13 linear ribonucleotides in a single run. The method has been validated by comparison of six extraction methods and also by measurement of the intracellular nucleotide levels of three plant species (cell cultures and leaves). The evolution of the nucleotide pool of Nicotiana tabacum cell culture during growth has also been measured, and showed an increase in the po…
Effect of ion exchange capacity and water uptake on hydroxide transport in PSU-TMA membranes: A DFT and molecular dynamics study
2020
Abstract Anion Exchange Membranes (AEMs) are nowadays used in a very wide range of different applications, from electrodialytic systems for water treatment, to Fuel Cells for energy generation. In many of these cases, the AEM is in contact with water molecules, either in aqueous or gas phase, which can strongly interact with the AEM polymer, thus affecting membrane properties. The role of water in fully swollen AEM and its effect on the diffusion of hydroxide is the focus of this work. Density Functional Theory (DFT) based calculations were merged with Molecular Dynamics (MD) simulations coming to a more accurate description of the ionic exchange capacity effect on the hydroxide ion diffusi…